Page: 32
123456 Output Garage-Door
On
123456 = User Code output Garage-Door on =
Turns output named as Garage-Door on.
OUTPUT Garage-Door ON
123456 Output Garage-Door
Off
123456 = User Code output Garage-Door off =
Turns output named as Garage-Door off.
OUTPUT Garage-Door OFF
NOTE: The user automation outputs can be also activated via the keypad or the keyfob.
NOTE: The name of the output has to be one word and spelled exactly as written in the panel, such as:
‘Garage Door’ is not acceptable. It has to be written as ‘Garage-Door’ in the panel and the respective
command will be ‘Garage-Door’.
Checking the User Automation Outputs status via SMS text commands
Example SMS command
send:
Description: Example SMS command
response:
1234 Output 1 Status 123456 = User Code. User Output 1 status
check.
OUTPUT ON or OUPUT OFF
123456 Output Garage-Door
Status
123456 = User Code. Output Garage-Door
status check.
OUTPUT Garage-Door ON or
OUTPUT Garage-Door OFF
NOTE: The name of the output has to be one word and spelled exactly as written in the panel, such as:
‘Garage Door’ is not acceptable. It has to be written as ‘Garage-Door’ in the panel and the respective
command will be ‘Garage-Door’.
Editing an SMS telephone number via SMS text command
Example SMS command
send:
Description: Example SMS command
response:
123456 Change
07777888999 07878888999
123456 = User Code. Change number
07777888999 to number 07878888999
NOTE: Use the country dialling code only
for foreign SIM cards.
CHANGE 07878888999
Start Uploading/Downloading via SMS text command
Example SMS command
send:
Description: Example SMS command
response:
123456 UDL 123456 = User Code. UDL = The Enforcer will
make an outgoing data connection to the
programmed PC1 number.
No response as the panel is
already connected to the PC1
9999 UDL 9999= Engineer Code UDL = The Enforcer will
make an outgoing data connection to the
programmed PC1 number.
No response as the panel is
already connected to the PC1
To Next Page
Loading...
