Page: 7
Select Bell
Learning…
1) Open the wireless bell.
2) Plug the battery connector into the battery terminal.
3) If a device is not learned = The GREEN and RED LEDs on the device will flash (alternating).
4) Press and hold the ‘LEARN' button on the device = The three LEDs start cycling around.
5) Release the ‘LEARN’ button = ‘Bell Learnt’ will be displayed and a confirmation tone on the panel
will be emitted.
If a bell has already been learnt, ‘Bell learnt already’ will be displayed.
5.3.4 Delete Devices
Already learnt bells may be deleted by entering this menu.
Delete All
Enter Code
To delete all wireless bells enter ‘2000’ (this is the Panel Security Code). ‘Please wait’ will be
displayed while the Euro 46 APP Panel deletes them.
Select Bell to Delete
This option deletes only a specific wireless bell that is learnt. Any bells that display ‘learnt’ can be
deleted. ‘Please wait’ will be displayed while the Panel deletes the wireless bell. Return to this
process to delete more devices.
5.3.5 Control Arming Stations?
Learn Devices?
Entering this menu allows the learning of wireless Arming
Stations onto the system.
Select Arming Station
Selects the Arming Station on the system that is to be learnt.
‘Learnt’ will be displayed if an Arming Station is already
learnt, or ‘Available’ will be displayed if not.
Select Arming Station
Learning…
1) Open the Wireless Arming Station.
2) Plug the battery connector into the battery terminal.
3) If a device is not learned = The GREEN and RED LEDs on
the device will flash (alternating).
4) Press and hold the ‘LEARN' button on the device = The three LEDs start cycling around.
5) Release the ‘LEARN’ button = ‘Arming Station Learnt’ will be displayed and a confirmation tone
on the panel will be emitted. If an Arming Station has already been learnt, ‘Arming Station learnt
already’ will be displayed.
5.3.6 Delete Devices
Arming Stations that have already been learnt, may be deleted by entering this menu.
Delete All
Enter Code
LEARN
>5s
LEARN
BUTTO N