VOCALISER INSTALLATION MANUAL
Page: 22 RINS119-5
8.3 Event Log Reset Status
The engineer has control of allowing or disallowing the user to reset the Vocaliser log (function
45 in the user menu).
¾ Dial for the event log reset status
¾ A “BEEP” will be heard
¾ Enter either of the following:
o Dial to disallow the user to clear the log
“SAVED” will be heard.
or
o Dial to allow the user to clear the log
“SAVED” will be heard
¾ “PLEASE ENTER COMMAND” will then be heard
returning you to the engineer menu.
To Next Page
Loading...
