Q-See QT SERIES - Page 37

37
Edit Schedule
Motion
Manual All Reverse Clear All
CancelOK
Manual All Reverse Clear All
00:00 ~ 24:00
Sun 0 2 4 6 8 10 12 14 16 18 20 22 24
Manual All Reverse Clear All
00:00 ~ 24:00
Mon 0 2 4 6 8 10 12 14 16 18 20 22 24
Manual All Reverse Clear All
00:00 ~ 24:00
Tues 0 2 4 6 8 10 12 14 16 18 20 22 24
Manual All Reverse Clear All
00:00 ~ 24:00
Wed 0 2 4 6 8 10 12 14 16 18 20 22 24
Manual All Reverse Clear All
00:00 ~ 24:00
Thur 0 2 4 6 8 10 12 14 16 18 20 22 24
Manual All Reverse Clear All
00:00 ~ 24:00
Fri
0 2 4 6 8 10 12 14 16 18 20 22 24
Manual All Reverse Clear All
00:00 ~ 24:00
Sat
0 2 4 6 8 10 12 14 16 18 20 22 24
06:08 ~ 07:58
D
F
E
D. Select the icon.
E. Click and drag with the mouse to remove (turn off
recording) specific times.
F. Click OK.
: Fills in (turns on recording)
: Removes (turns off recording)
Manual: Set start and end times numerically.
Record
Live Display Camera Record Alarm Network SystemAccount and Authority
Record
Mode Settings
Schedule Config
Advanced
Encode Parameters
Event Record Stream
Timing Record Stream
Mode Settings
Camera Name Sensor Record Schedule
Motion Record Schedule Timed Record Schedule
Cam1
Cam2
Cam3
Cam4
Cam5
Cam6
AdvancedSchedule Config
Stream Settings
Sub Stream Settings
Apply
G
G. Click Apply.
All: Fills in (turns on recording) for entire day
Reverse: Inverts schedule - times scheduled
for recording are turned off, and vice-versa
Clear All: Empties (turns off recording) for entire day