40
Chapter 3 . USB One Touch Copy
Syst e m
N um ber of secon ds ( pr e ss the one t ouch copy bu t t on t o
t rigger dat a copy)
All NAS m odels 0.5 sec
Data Copy by t he Fron t USB Port
The NAS supports instant dat a copy backup from t he ext ernal USB device t o t he NAS or t he
ot her way round by t he front one touch copy but ton. To use t his function, follow t he steps
below :
1. Make sure a hard drive is installed and form at t ed on t he NAS. The default net work
share Qusb or Usb is creat ed.
2. Turn on t he NAS.
3. Configure the behavior of the Copy but t on on “ Backup” > “ USB one t ouch copy” page.
4. Connect the USB storage device to t he front USB port of the NAS.
5. Press t he Copy but t on. The USB LED will flash. The data will be copied to or from t he
USB device according to t he NAS settings.
N ot e:
This feat ure adopt s increm ent al backup. Aft er the first t im e dat a backup, t he NAS only
copies t he changed files since t he last backup.
This feat ure is only available on cert ain NAS m odels. Please refer to the product
specification t able for det ails at www.qnap.com .
To Next Page
Loading...
