84
ii. Place har d drive ont o tray so t hat t he side holes of the t ray are aligned with the side
holes of t he harddrive.
iii. Reinsert fastening panels t o lock drive t o t ray.
b. 2.5” HDD/ SSD:
i. Rem ove t he fast ening panels from the sides of t he drive t ray.
ii. Place hard drive onto tray so t hat t he bot t om holes of the t ray are aligned with the
bot t om holes of t he harddrive.
iii. Reinsert fastening panels t o lock drive t o t ray.
To Next Page
