QNAP Turbo NAS - Manage the NAS via Web Browser

13
B. Manage the NAS
Manage the NAS by the web browser on Windows or Mac
1. You can access the web administration page of the NAS by the following
methods:
a. Use Finder to find the NAS.
b. Open a web browser and enter http://NAS IP:8080
The default NAS IP is 169.254.100.100:8080. If you have configured the NAS
to use DHCP, you can use Finder to check the IP address of the NAS. Make sure
the NAS and the computer that runs Finder are connected to the same subnet.
If you cannot search for the NAS IP, try to connect the NAS to your computer
directly and run Finder again.
2. When the administration page of the NAS is shown, click “ADMINISTRATION”.
Enter the user name and password to login.
Default user name: admin
Password: admin
Note that if you login the administration interface with a user account without the
administration right, you can only change your login password.