QNAP Turbo NAS User Manual

23
3.1.2 Network
3.1.2.1 TCP/IP
i. IP Address
You can configure the TCP/IP settings of the NAS on this page. Click the Edit button
(
) to edit the network settings.
For the NAS which supports two LAN ports, you can connect both network interfaces
to the same switch and configure the TCP/IP settings. The NAS will acquire two IP
addresses and this is known as multi-IP setting. To use port trunking mode for dual
LAN connection, see section (iii).

QNAP Turbo NAS Specifications

General

Brand	QNAP
Model	Turbo NAS
Category	Network Storage Server
Language	English