8
Chapter 1 Install the NAS
For the information of the hardware installation, please refer to the “Quick
Installation Guide” in the product package.
1.1 Hard Disk Compatibility List
This product works with 2.5-inch/ 3.5-inch SATA hard disk drives from major hard
disk brands. For the HDD compatibility list, please visit http://www.qnap.com/
.
QNAP disclaims any responsibility for product damage/ malfunction or data
loss/ recovery due to misuse or improper installation of hard disks in any occasions
for any reasons.
Note that if you install a hard drive (new or used) which has never been installed
on the NAS before, the hard drive will be formatted and partitioned automatically
and all the disk data will be cleared.
To Next Page
Loading...
Need help?
General
