222
10.6 System Temperature Protection
The NAS shuts down automatically for hardware protection when any of the
following criteria is met:
The system temperature exceeds 70°C (158°F)
The CPU temperature exceeds 85°C (185°F)
The hard drive temperature exceeds 65°C (149°F)*
* Note that when the temperature of any hard drives on the NAS exceeds 65°C
(149°F), the NAS waits for the standby time (configured in “System Administration”
> “Hardware”) and another 10 minutes and will shut down automatically. For
example, if you have configured the NAS to enter the standby mode after idling for
5 minutes, the NAS shuts down automatically when the temperature of any hard
drive(s) exceeds 65°C (149°F) continuously after 15 (5+10) minutes.
To Next Page
Loading...
Need help?
General
