41
3.1.6 Power Management
This section enables you to restart or shut down the server immediately, define the
behavior of the server when the power resumes after a power outage, and set
schedule for automatic system power on/ off/ restart.
Restart/ Shutdown
Restart or shut down the server immediately.
If you try to restart or turn off the NAS from the web-based interface or the LCD
panel when a remote replication job is in process, the NAS will prompt you to
ignore the running replication job or not.
Enable the option “Postpone the restart/shutdown schedule when replication
job is in process” to allow the scheduled system restart or shutdown to be
carried out after a running replication job completes. Otherwise, the NAS will
ignore the running replication job and execute scheduled system restart or
shutdown.
Wake on LAN
Enable this option to power on the NAS remotely by Wake on LAN. Note that
if the power connection is physically removed when the NAS is turned off, Wake
on LAN will not function whether or not the power supply is reconnected
afterwards.
This function is applicable to certain models only. Please refer to the
comparison table for more details:
http://www.qnap.com/images/products/compa
rison/Comparison_NAS.html
Power resumption settings
Configure the NAS to resume to the previous power-on or power-off status,
turn on or remain off when the AC power resumes after a power outage.
Power on/ power off/ restart schedule
You can select every day, weekdays, weekend, or any days of the week and set
the time for automatic system power on, power off, or restart. Weekdays stand
for Monday to Friday; weekend stands for Saturday and Sunday. Up to 15
schedules can be set.
To Next Page
Loading...
Need help?
General
