96
public access. If this option is disabled, the users must enter an authorized
user name and password to access the server.
Passive FTP Port Range
You can use the default port range (55536-56559) or define a port range larger
than 1023. When using this function, make sure you have opened the ports
on your router or firewall.
FTP Transfer Limitation
You can configure the maximum number of FTP connections, maximum
connections of a single account and the maximum upload/ download rates of
a single connection.
Respond with external IP address for passive FTP connection request
When passive FTP connection is in use, the FTP server is configured under a
router, and the remote computer cannot connect to the FTP server over the
WAN, enable this function. By enabling this function, the FTP service replies
the manually specified IP address or automatically detects the external IP
address so that the remote computer is able to connect to the FTP server.
To Next Page
Loading...
Need help?
General
