2) You can press the “Refresh” button to search again.
3) If you can’t find the target receiver device from the list, you can press the
“Manual” button to enter the receiver IP address manually and connect.
9.6 Login
1) When it connects to a “Code” protection enabled TWP-1500 receiver, you
have to enter the “Code” and press the “Connect” button to login the
receiver.
(You can find the CODE from the right-upper of OSD standby screen)
2) If you want to connect to another receiver or cancel the login, please press
the “Cancel” button.
To Next Page
Loading...