Qomo WIPS2 User Manual

26
Item
Description
Show Receiver
Information
Show Receiver Information on screen
Web Admin
Open web admin page
Search Receiver
Connect to another receiver device
Launch SidePad
Launch SidePad sender
Enable WebSlides
Enable WebSlides
Select Projection Desktop
Select the projection desktop
Projection Quality
Change projection quality
Projection Mode
Change the presentation or video mode.
Resolution Setting
Change the resolution setting
Projection Aspect Ratio
Change the projection screen aspect ratio
Enable IWB USB Bridge
Enable IWB USB bridge
Advanced Screen Capture
Enable advance screen capture
Send Audio to Display
Enable audio projection
Auto Power Management
Enable Auto Power management feature
Auto WiFi Connect
Enable Auto WiFi connect feature
Make Plug&Show Token
Make Plug&Show USB token
Copy Application to
Desktop
Copy the application to desktop
Hot Key
Hot Key Settings
About
About this application
Exit
Exit the application
9.10.1 Show Receiver Information
1) Click “Show Receiver Information”, it will display the Receiver Information,
such as WiFi Name, IP Address and code on the upper of desktop, and it will
close automatically after 30 seconds.
9.10.2 Web Admin
1) Click “Web Admin”, it will open the browser and connect to the receiver web

Qomo WIPS2 Specifications

General

Brand	Qomo
Model	WIPS2
Category	Projector Accessories
Language	English