Qomo WIPS2 User Manual

54
Change Standby Image
 Replace Logo Image: Replace logo image only.
 Replace entire standby image: Replace the whole standby
image
 <Reset to default>: Restore to default Logo image.
 <Image File Upload>: Upload the customized Logo Image.
Display Option
 Device Info: Show or Hide the device info.
 Font Size: Change the font size of display info.
 Screen Saver Settings: Enable or disable the screen saver and
also configure the idle interval. (default is 5 mins)
11.5.5 Change Passwords
1) Click [Change Password] button, you can change the password setting.
(Length: up to 8 characters)
 <Enter New Password>: enter new password you want to change
for each category.
 <Confirm New Password>: Confirm the new password again.
 <Apply>: Confirm and Save modifications.

Qomo WIPS2 Specifications

General

Brand	Qomo
Model	WIPS2
Category	Projector Accessories
Language	English