10) DoWiFi for Mac
10.1 Install the application
1) Make sure your PC WiFi is enabled already, and connect your PC to WIPS2
TWP-1500 box through WiFi.
2) Open your browser and enter the Device Host Name (SSID) or IP address
on browser. You can find the IP address and Host Name (SSID) on the
projector screen. (Default Host Name (SSID) is TWP-1500, Default
IP is 192.168.100.10)
3) Download the client software for “Mac” and install on your PC. (Ps. You
can also launch the application from PnS token directly.)
4) Launch TWP-1500 client and connect to TWP-1500 receiver.
10.2 Start the application
1) Click WIPS
2
TWP-1500 from Application folder to execute the application.
2) It will start to search WIPS
2
TWP-1500 receiver automatically.
10.3 Quick Connect
1) TWP-1500 will memorize the last successful connection profile and open the
quick connect dialog, you can enter the code and press the “Connect”
To Next Page
Loading...
Need help?
General