Qomo WIPS2 User Manual

37
to list all available WiFi Network name.
3) If you don’t like to change the WiFi Network and keep the connection to
current network, you can press the “Skip” button.
10.5 Connect to Receiver Device
1) TWP-1500 will search and list the TWP-1500 receiver Device. You can select
the target receiver device and press the “Connect” button to connect the
selected receiver device.
2) You can press the “Refresh” button to search again.
3) If you can’t find the target receiver device from the list, you can press the
“Manual” button to enter the receiver IP address manually and connect.
10.6 Login
1) When it connects to a “Code” protection enabled TWP-1500 receiver, you
have to enter the “Code” and press the “Connect” button to login the
receiver.
(You can find the CODE from the right-upper of OSD standby screen)

Qomo WIPS2 Specifications

General

Brand	Qomo
Model	WIPS2
Category	Projector Accessories
Language	English