Qomo WIPS2 User Manual

55
11.5.6 Reset to Default
1) Click [Reset to Default] button to restore factory default settings.
<Apply>: Confirm and take action.
*** To execute the Hardware Factory Reset to Default, Please follow
below procedures.
1. Press [Reset] button and Hold.
2. Turn on WIPS
2
TWP-1500 box.
3. Wait for over 10 seconds and relief [Reset] button.
4. It will take effect to restore factory default settings.

Qomo WIPS2 Specifications

General

Brand	Qomo
Model	WIPS2
Category	Projector Accessories
Language	English