QUANTA QuantaGrid S31A-1U User Manual

BMC CONFIGURATION GROUP
3-63
Procedure:
Add a new user:
1. To add a new user, select a free slot and click Add User. This opens the Add User
screen as shown in the screenshot below.
Figure 3-40. Add User Page
2. Enter the name of the user in the User Name field.
User Access To enable or disable the access privilege of the user.
Network Privilege Displays the network access privilege of the user.
SNMP Status Displays if the SNMP status for the user is Enabled or Disabled.
E-mail ID Displays e-mail address of the user.
Add User To add a new user.
Modify User To modify an existing user.
Delete User To delete an existing user.
Note:
The Free slots are denoted by "~" in all columns for the slot.
Note:
 User Name is a string of 4 to 16 alpha-numeric characters.
 It must start with an alphabetical character.
 It is case-sensitive.
 Special characters like '-' (hyphen), '_' (underscore) and, '.' (dot) are allowed , but not in
the prefix and suffix.
Table 27: User Management Page (Continued)
ITEM DESCRIPTION

QUANTA QuantaGrid S31A-1U Specifications

General

Brand	QUANTA
Model	QuantaGrid S31A-1U
Category	Server
Language	English