BMC CONFIGURATION GROUP
3-64
3. In the Password and Confirm Password fields, enter and confirm your new pass-
word.
4. Enable or Disable the User Access Privilege.
5. In the Network Privilege field, enter the network privilege assigned to the user
which could be Administrator, Operator, User, Callback or OEM proprietary.
6. In the Extended Privileges, check the required options,
KVM
VMedia
7. Check the SNMP Status check box to enable SNMP access for the user.
8. Choose the SNMP Access level option for user from the SNMP Access drop-down
list. Either it can be Read Only or Read Write.
9. Choose the Authentication Protocol to use for SNMP settings from the drop-down
list.
10. Choose the Encryption algorithm to use for SNMP settings from the Privacy proto-
col drop-down list.
11. In the Email ID field, enter the email ID of the user. If the user forgets the password,
the new password will be mailed to the configured email address.
Email Format: Two types of formats are available:
AMI-Format: The subject of this mail format is 'Alert from (your Hostname)'. The
mail content shows sensor information, ex: Sensor type and Description.
Password must be at least 4 characters long.
White space is not allowed.
This field will not allow more than 20 characters if “20 Bytes” option is chosen.
It is recommended that the Extended privileges support to KVM and VMedia should be pro-
vided only to the ADMIN user and shouldn’t be provided to USER and OPERATOR privilege
level users. The Admin user can provide the Extended privilege support to USER and OPERA-
TOR privilege level users at their own risk.
Password field is mandatory, if SNMP Status is enabled.
Password field is mandatory, if Authentication protocol is changed.
SMTP Server must be configured to send emails.
To Next Page
Loading...
Need help?
General
