QUANTA QuantaGrid S31A-1U - Page 134

BMC REMOTE CONTROL
3-76
Add Hot Keys
Procedure:
1. Click Keyboard > Hot Keys > Add Hot Keys to show below snap-
shot
 Add: used to add User Defined Macros
 Delete: used to delete User Defined Macros
 Close: used to close User Defined Macros window
2. Click Add to define macro
 Windows: used to define Windows key
 Tab: used to define Tab key
 Clear: used to delete the latest defined key
 Clear All: used to delete all defined key
 ok: used to confirm and add defined macro
Note:
Please press key one by one to define the macro. If click to close
this window and then click Add to open again, defined macro kept is
normal. Support maximum 6 combo keys in 1 macros
3. Click ok to add this macro as below
Table 31: Keyboard (Continued)
ITEM DESCRIPTION