BMC FRU INFORMATION
3-25
Procedure:
1. Select the event categories from the Event Log Category drop-down menu.
2. Select the sensor name filter to view the event for the selected filter from the Filter
Type drop-down list.
3. Select either BMC Timezone or Client Timezone. The list of events is listed.
4. Click the Clear All Event Logs button to clear all events from the list.
5. To save all the existing event logs, click on Save Event Logs button.
SEL Severity
The Event Log page specifies the severity of the SEL to identify the event severity code as
follows:
: Severity Information
: Severity Warning
: Severity Critical
Table 9: Event Log Page
ITEM DESCRIPTION
Event Log Category
The category options:
All Events,
System Event Records,
BIOS Generated Events,
SMI Handler Events,
System Management Software Events,
System Software - OEM Events,
Remote Console Software Events,
Terminal Mode Remote Console Software Events.
Filter Type
Filtering can be done with the sensors mentioned in the list.
Once the Event Log category and Filter type are selected, the list of events will be
displayed with:
Event ID
Time Stamp
Sensor Type
Sensor Name
Description
BMC Timezone BMC UTC offset timestamp value of the events.
Client Timezone Events of client UTC offset timestamp.
UTC Offse
Displays the current UTC Offset value based on which event Time Stamps will be
updated. Navigational arrows can be used to selectively access different pages of
the Event Log.
Clear All Event Logs Deletes all the existing records for all the sensors.
Save Event Logs To save all the existing Event Log records.
To Next Page
Loading...
