Quantech QWC3050T-200T User Manual

SECTION 7 – UNIT CONTROLS
FORM QWC3-NM1
ISSUE DATE:11/20/2020
QUANTECH
143
7
Provides a quick reference list for the Unit key
setpoints.
LD22073
FIGURE 36 - UNIT KEYS OPTIONS PROGRAMMING QUICK REFERENCE LIST
Options Key
(press Options Key
to adv.)
Display Language
YCWL Mode Select
System Switches
on/off
Chilled Liquid Type
(water or glycol)
Ambient Control
(standard or low)
Local/Remote Mode
Unit Control Mode
(Return or Leaving)
Display Units
(English or Metric)
System Lead/Lag Control
(Manual or Automatic)
Fan Control Mode
(Not applicable to a YCWL
Manual Override Mode
Current Feedback Option
Soft Start Option
Unit Type
(”Chiller” MUST be Selected
Via No Jumper Installed
(Viewable Only))
Refrigerant Type
R-410A
(Programmed under Service Mode)
Viewable Only)
Power Failure Restart
Expansion Valve Type
(Thermoplastic or Electric)
(Programmed under Service
Mode, Viewable Only)
Must be programmed
for Thermostatic
Flash Card Update
Remote Temp Reset
Pump Control
Pump Selection
Hot Gas Bypass Type
QWC3 Heatpump
Flashcard Data Logging
QWC3

Quantech QWC3050T-200T Specifications

General

Brand	Quantech
Model	QWC3050T-200T
Category	Chiller
Language	English