Communication Protocol CubiScan 25 Command Set
CubiScan 25 Service Manual 65
Model
This command causes the CubiScan 25 to change its current model designation. The CubiScan 25
= 05.
2 1 Location ID Command Alpha (L) 4Ch
3 6 Location ID Alpha 000000-ZZZZZ
91End of Text Control(ETX) 03h
10 1 Carriage Return Control (CR) 0Dh
11 1 Line Feed Control (LF) 0Ah
Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Location ID Command Alpha (L) 4Ch
3 1 Acknowledge Alpha (A) 41h
41End of Text Control(ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
61Line Feed Control(LF) 0Ah
Negative Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Location ID Command Alpha (L) 4Ch
31Neg. Acknowledge Alpha (N) 4Eh
41End of Text Control(ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
61Line Feed Control(LF) 0Ah
Pos Len Description Type Range ASCII
Command Format
1 1 Start of Text Control (STX) 02h
2 1 Model Command Alpha (!) 21h
32Model Number Numeric05-07
51End of Text Control(ETX) 03h
6 1 Carriage Return Control (CR) 0Dh
71Line Feed Control(LF) 0Ah
Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Model Command Alpha (!) 21h
3 1 Acknowledge Alpha (A) 41h
Pos Len Description Type Range ASCII
To Next Page
Loading...
