18 quTAG MC Manual www.qutools.com
Daisy only can be started by command from that shell
window:
/home/me/daisy/daisy &
b) permanently: add the extra search path to the loader
config. Ubuntu: create a file "daisy.conf" that contains just
one line /home/me/daisy .
Copy that file to /etc/ld.so.conf.d and call ldconfig for cache
generation. Root privileges required.
Daisy now can be started by command or file manager click.
Note that daisy versions can't be installed in parallel this way
because daisy's shared libs don't have real version
management.
The following software is packed in the zip/tgz archive:
"Data Analysis and Imaging System" – the main control software
for the quTAG. See chapter 7 .
The firmware update tool. See section 6.2 .
A record & merge tool for synchronized devices. See section 8.1 .
A command line tool for simple tasks. See section 8.3 .
The directory contains the custom programming library, with
HTML documentation and LabView wrapper VIs. See section 8.1 .
USB driver packet for Windows 32 and 64 Bit.
When using the Windows installer, also start menu entries for the programs are created.
6.2 Firmware Update
Attention: Naturally, firmware updates are a delicate process and can
potentially harm the device if done incorrectly. Please read and follow the
instructions carefully.
A firmware update is generally necessary when a new software version is installed. If the control
software is warning about an outdated firmware or if you are unsure if the firmware currently
running is up to date, execute the following procedure:
1. Turn on the device. If any quTAG software is still running, close it.
To Next Page
Loading...