www.qutools.com quTAG MC Manual 25
The data of the currently displayed histogram or of every finished measurement can be saved
using the buttons next to "Save histogram".
7.4 Correlation Measurement: HBT
The HBT measurement and fit feature is accessible in the "Cross Correlation". This tab will only
be visible if the "HBT" option (see chapter 4 ) is activated.
Figure 12: HBT measurement and fit tab of Daisy
The measurement is configured in the "Parameters" field. Here the histogram width, a bin count
as well as the two input channels are selected. Select "active" to start collecting the correlation
data.
The "Results" shows several parameters of the current measurement including the event rates,
measurement time and the g
(2)
(0) value.
To Next Page
Loading...