6 quTAG MC Manual www.qutools.com
2. Safety and Maintenance
2.1 Legend
An instruction which draws attention to the
risk of injury or death.
Risk of electric shock. High voltages present.
The equipment, as described herein, is designed for use by personnel
properly trained in the use and handling of mains powered electrical
equipment. Only personnel trained in the servicing and maintenance of this
equipment should remove its covers or attempt any repairs or adjustments.
If malfunction is suspected, immediately return the part to the vendor for
repair or replacement. There are no user-serviceable parts inside the
electronics. Modified or opened electronics cannot be covered by the
warranty anymore. Take special care if connecting products from other
manufacturers. Follow the General Accident Prevention Rules.
If this equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired. Do not operate
the instrument outside its rated supply voltages or environmental range. In
particular, excessive moisture may impair safety.
For laboratory use only. This unit is intended for operation from a normal,
single phase supply, in the temperature range 5° to 40°C, 20% to 80% RH.
To Next Page
Loading...