12
Main Screen Overview
1) Opens the Main Menu.
2) Lists all measurements made within the same session. You can scroll through each capture using the
up and down arrows
3) Displays the connection method – USB or Wi-Fi
4)
Click the Connect [] button to begin or the Disconnect [
]
to halt a measurement series. Click the
Connect [
] button again, to continue.
5) Indicates if the system is ready to make a measurement. Other system status messages occur here
depending on sensor and digitizer conditions.
6) Measure, Wave, List and Sensors tabs that allow you to view information in more detail
7) Displays details of the information captured from the sensor (s) based upon the selected profile
8) Displays a wave representation of the information captured
9) Matrix mode opens a separate window with just the measurements.
10) Opens the dose unit settings.
11) Opens the display profile settings to change the result matrix.
12) Export the current measurement to Excel.
13
7
12
To Next Page
Loading...
Need help?
General
