27
Automatic Profile
In Measurement view, profiles define which values are displayed in the matrix. You will rarely want to
choose a different profile other than Automatic Profile (Auto).
Automatic Profile looks at the sensors in a measurement and whether it is diagnostic, fluoro or mammo
and adjusts the matrix dynamically. When a new measurement comes in from the digitizer, or when you
navigate to another measurement within the session, Automatic Profile adjusts to this measurement.
Accu-Gold always defaults to Automatic Profile when starting.
List view may contain measurements of various sensors and has to take multiple variations into account.
List view uses its own profile for the values that are displayed. It aggregates all sensors present in the
session and selects a profile that contains all of them. This is considered the ‘Auto’ profile. The profile
choice of Measurement view does not influence List view or Wave view.
You can set the preferred kV result type for the auto profile in the measurement settings menu. Click on
the settings button and choose between these types:
Peak Average
Average kV
Practical Peak Voltage
For new installations, this value is set to .
Custom Profile
Accu-Gold provides the user with the opportunity to create custom profiles that can be adjusted as
needed. To customize the matrix setup, select Custom Profile from the profile list.
By switching to Custom Profile, the matrix layout icon appears to the right of the measurement matrix.
Click the matrix layout icon to change the row and column count of the Custom Profile.
To Next Page
Loading...
Need help?
General
