7
Hardware Overview
The Accu-Gold system consists of a digitizer module, sensor(s) and a display. The Accu-Gold digitizer is
available in different models that are suited for specific applications, the differences being which sensors
can be used. The Accu-Gold software is the same for all models but the measurement data that is available
will depend on the model digitizer used and connected sensor(s).
Differences between the ‘legacy’ hardware and the ‘plus’ hardware
The original digitizers of the Accu-Gold system were the AGDM and the RGDM. The RGDM was available
in several versions depending on the sensors they could be used with.
A desire for product enhancements brought us the Accu-Gold plus system. A new line of sensors were
designed with a smaller footprint as well as a combination sensor that eliminates the need to carry multiple
sensors – the DM+ sensor. While still being compatible with legacy hardware, the AGDM+ digitizers also
provide improved performance for legacy sensors.
4
Digitizers
Models* Available sensor inputs:
Ion
Chamber
Dose
Diode
AGMS
(Multisensors)
Aux
(Light
Sensor)
mA
D
cc
old Digitizer Modu
GD
ap
old Digitizer Modu
DDM
cc
ose Digitizer Modu
*The legacy digitizers are not compatible with the “+” series Multisensors.
4
see Appendix E