77
DDX6-WL
For use with Accu-Gold, Accu-Pro, and Accu-Dose, the DDX6-WL is a solid-state dose sensor for
diagnostic range measurements. It is a small solid-state sensor for single exposures and fluoroscopy in
the Diagnostic range. It measures dose, dose-rate, and time and is passively corrected for beam quality.
It may be used simultaneously with an AGMS-D multi-sensor in entrance / exit exposure measurements.
It is especially recommended for low dose-rate measurements, e.g. pediatric dose-rates.
ens
DX
in Ra
0 nR
00 pGy
ax Ra
.65 R
.7 mGy
i
os
00 n
nG
ax Dos
.8 k
5 G
ccura
5% usin
a
@ 80kVp with 2.5 mm Al total filtratio
(IEC 61267 RQR-6)
nergy Dependenc
5% from 50 kVp to 120 kVp at 2.5 mm
iltration Dependenc
5% t
0% from 2.5 mm Al to 23 mm