85
Connecting manually
If the Nugget is not able to connect automatically, you will need to connect manually. If there are multiple
Nuggets that show up, you will also have to connect manually.
For Windows 10, if you get this dialog box, click on
“Connect using a security key instead”.
On the computer, check the Wireless Network Connection pane.
There, you will find “Nugget_51-xxxx” as one of the Wi-Fi devices (the
ID number will be the Nugget_serial number). Click on the Nugget
and when asked for the password, enter 12345678.
To Next Page
Loading...
