Radcal ACCU-GOLD2 - DAP Chamber Measurements Comparison; mA Sensor Measurements Comparison; Light Sensor Measurements Comparison; Appendix F: Quiet-Bias Technology

96
Dose / Total Dose yes yes
Ratio of the measurements of extracted dose to total dose.
Dose Rate yes yes
Dose Rate
Dose Ratio DD / AGMS yes yes
Dose Ratio DD / AGMS
Dose Ratio DD / IC yes yes
Dose Ratio DD / IC
Total Dose yes yes
Total dose of source measurement.
DAP Chamber
DAP yes yes Dose Are Product
DAP Rate yes yes DAP Rate
DAP/Pulse yes yes DAP per pulse
DAP Temperature yes yes Temperature of the DAP sensor
DAPChkp+
DAP yes yes Dose area product
DAP Rate yes yes DAP rate
Temperature yes yes Temperature of the DAP sensor
DAP End Rate yes yes
(see END for AGMS)
mA Sensor
Charge yes yes
The sum of mA values during the region of interest is the
value of mAs.
Current yes yes
Average mA is mAs divided by the width of the region of
interest.
Light Sensor
Illuminance yes yes
Measured illuminance
Luminance yes yes
Measured luminance with luminance adapter