RadioMaster MT12

• Repeat - Frequency to repeat the vibraon paern. Opons are !1x (do not vibrate at startup even if the
switch is acve), 1x (vibrate once), 1s thru 60s (vibrate every xx seconds).
SD Logs - Creates a log .csv le of the radio and telemetry values in the LOGS folder on the SD Card. The radio
will create a new entry into the log le based on the frequency congured in the Value seng. The value
opons are 0.0s - 25.5s (Note: 0.0 eecvely disables this opon). Each me the funcon is acvated, the
radio will create a new log le provided that the funcon is acvated at least as long as the value seng.
Note: Logging will not start if SD card has less than 50mb of free space.
Backlight - Adjusts the brightness of the radio screen based on the source dened in the value dropdown.
Screenshot - Creates screenshot as a .bmp le in the SCREENSHOT folder on the SD Card.
RacingMode - Enables racing mode (low latency) for FrSky Archer RS receivers. Racing mode must also be
enabled in External RF Module Sengs.
Audio Amp O (select radios) - Disables the Audio Amplier so that no sound comes from the speaker,
including annoying feedback or interferance. This opon is only available on select radios.