RadioMaster MT12

Inputs screen
The inputs screen shows you an overview of your congured inputs. Each row represents an input line and displays
the following informaon from le to right: Input name, weight, acvaon switch, line name. These items are
described in the Input conguraon page area below.
Selecng an exisng input line and pressing [Enter] will toggle between Copy/Paste mode and Move mode. In
Copy/Paste mode, a copy of the input line is made which can be pasted in the desired input line. In Move mode, the
selected input can be moved to a dierent line. Press the [Return] buon to exit this mode.
Selecng an empty input line and pressing [Enter] will create a new input and open the input conguraon page.
Selecng an exisng input line and long-pressing [Enter] will give you the following opons:
• Edit - opens the input configuration page for that input line.
• Insert before - Inserts a new input line before the selected input.
• Insert after- Inserts a new input line after the selected input.
• Copy - copies the selected input line.
• Move - selects the input line to be moved. The input is moved using one of the paste commands
after a new line is selected (i.e. cut & paste).
• Delete - deletes the selected input line.
• Paste before - pastes the copied or moved input line before the selected input line.
• Paste after - pastes the copied or moved input line before the selected input line.
Input Conguraon Page
3.6. Input conguraon page
The input conguraon page allows you to edit the input conguraon parameters. To the right of the conguraon
parameters, you can see a live graph that shows how your conguraon opons will aect the slope of the input.
Input Name - Name for the input. Three characters are possible.
Line Name - Name of the individual line in the input. Mulple physical inputs can be mapped to one input by adding
an addional input line under the input.
Source - The physical control used for the input. In addion to physical controls, you can also specify MAX (always
returns 100), cyclics, trim switches, channel values and more. Moving the physical control aer the source has been
selected will automacally map it to that input.
Weight - Percentage value of the sck travel to use (oen referred to as "rates"). Long-pressing here will switch from
numerical value to a global variable.