RadioMaster MT12

Wav volume - The volume for alerts and warnings and sounds that are played with the Play track special
funcon
Bg volume - The volume for background .wav les (music) that are played with the BGMusic special funcon
Vario (Variometer)
Volume - Volume for variometer beeps
Pitch zero - Low pitch frequency
Pitch max - High pitch frequency
Repeat Zero - The me before the tone repeats in milliseconds
Note: In order for the variometer to funcon, it must be turned on via the Vario special or global funcon.
See Special Funcons for more informaon on how to congure this.
Hapc
Mode - congures when the radio vibrates.
• All - Vibrates when the buons are pressed and when there are alerts or warnings.
• No Key - No vibraons when buons are the pressed or scroll wheel is turned but does vibrate when there
are alerts or warnings.
• Alarm - Only vibrates for alarms or warning sounds.
• Quiet - No vibraons are made
Length - Duraon of vibraon.
Strength - Strength of vibraon
Contrast - Screen contrast seng.
Alarms
Baery Low - Voltage to trigger low baery alarm.
Inacvity - Time to trigger inacvity warning.
Memory low - Enable/disable low memory warning.
Sound O - An "alarms disabled" visual warning is displayed when the transmier is turned on if the sound
mode is set to quiet.
RSSI Shutdown - Checks if a receiver is sll connected to the radio on aempted shutdown. Makes a audio
and visual alert if one is detected.
Backlight
Mode
• O – Always o.
• Keys – Turns on when buons are pressed.
• Ctrl – Turns on when scks, switches, and knobs are used.
• Both – Turns on when buons, scks, switches, and knobs are used.
• ON – Always on.
Duraon - The length in seconds that the backlight is on. The minimum value is 5 seconds. The maximum
value is 600 seconds.
Brightness - Screen brightness level.
Alarm - The backlight turns on when there are alarms or warnings.
Splash Screen - Duraon to display the splash screen.
Power On delay - The delay between when the power buon is pushed and when the radio turns on. The
opons are: 0s, 1s, 2s, 3s
Pwr O delay - The delay between when the power buon is pushed and when the radio shuts o. The
opons are: 0s, 1s, 2s, 3s, 4s. It is recommended to set at least a 1s delay in order to prevent the radio from
being shut o in the case of an accidental buon press.
Owner ID - Custom registraon ID used only for users with ISRM modules.
Time Zone - Time zone radio is operated in.
Adjust RTC - Adjust the transmier's real-me clock to match the me determined by the GPS.
GPS Coords - The GPS coordinate format that will be displayed.
Country code - Used by some RF modules to ensure adherence to local regulatory RF requirements. Opons
are America, Japan, Europe.
Voice language - Language for the voice pack. This seng and the voice pack folder on the SD card must
match for the sounds to be played.