SAFETY LABELS
OM 0495SB-A [10]
IMPORTANT: Keep all decals clean and legible.
Replace all missing, illegible, or damaged decals.
IMPORTANT: Decal placement locations shown
are approximate; decals should not be placed in a
location where the operator’s field of view is
impeded and should not cover any portion of other
decals installed in the same vicinity.
INSTALLING OR REPLACING DECALS:
Thoroughly clean the area where decal is to be
placed using mild soap and water. Allow the
surface to fully dry. Remove the backing from the
decal, exposing the adhesive surface. Apply the
decal to the recommended position shown in the
diagram below and smooth out any bubbles.
To Next Page
Loading...