MAINTENANCE
OM 0495SB-A [37]
MAINTENANCE
ALWAYS USE GENUINE PARTS WHEN
REPLACEMENT PARTS ARE
REQUIRED
1. Keep the tractor and snowblower
properly maintained.
2. Park the tractor/snowblower on level
ground, place the transmission in
neutral, set the parking brake,
disengage the PTO, lower the
snowblower to the ground, place all
control levers in neutral, shut off the
engine and remove the ignition key and
allow the rotating parts to stop BEFORE
making any snowblower adjustments.
3. To avoid injury, do not adjust, unblock
the driving system, or service the
snowblower with the tractor engine
running.
4. Keep the tractor/snowblower clean.
Snow, dirt or ice build-up can lead to
malfunction or personal injury from
thawing and refreezing in garage.
5. Always wear eye protection when
cleaning or servicing the snowblower or
subframe.
6. DO NOT service the tractor while the
engine is running or hot, or if the unit is in
motion. Always lower snowblower to the
ground. If necessary to service
snowblower in raised position, securely
support with stands or suitable blocking
before working underneath. Do not rely
on hydraulically supported devices for
your safety. They can settle suddenly,
leak down, or be accidentally lowered
7. Always turn off the engine BEFORE
unblocking equipment and making any
repairs, adjustments, or inspection.
8. The manufacturer will not claim responsibility for
fitment of unapproved parts and/or accessories
and any damages because of their use.
9. Make sure all shields and guards are securely in
place following all service, cleaning, or repair
work.
10. Do not modify or alter this snowblower or any of
its components or operating functions. If you have
questions concerning modifications, consult with
your dealer.
11. Do not operate a snowblower that is defective or
has missing parts. Make sure that all
recommended maintenance procedures are
completed before operating the snowblower.
12. Check all controls regularly and adjust where
necessary. Make sure that the brakes are evenly
adjusted.
13. Periodically check all nuts and bolts for tightness,
especially wheel hub and rim nuts.
To Next Page
Loading...