Output driveline ø1" x 53"
Key 1/4" x ø7/8" HALF MOON #807
Hex bolt ø5/16" NC x 2 1/2" Lg. GR. 5, PTD
Nylon insert locknut ø5/16"NC PTD
Shear bolt ø1/4"NC x 1 1/4" Gr.2 + nut and lockwasher
Shear bolt ø5/16"NC x 2 1/4" Gr.5 + nut and lockwasher
Round end key ø1/4" x 1/4" x 2" Lg.
Carriage bolt ø5/16"NC x 3/4" PTD
Flange bearing ø1" with set screw
Rotation bushing 1.378" x 1.627 x 2" Lg
Hex bolt M6 x 1.00 x 16 mm Gr.8.8 PTD
Flat washer ø1/4" (5/16" int.) PTD
Flat washer #12 (1/4" int) PTD
32cc hydraulic motor with restrictor
Seal kit and Instruction sheet
Round end key 5mm x 5mm x 16mm
Adaptor ø9/16" JIC M x ø9/16" ORB M
Hose ø1/4" x 66", 9/16"JIC SWF 90° x 1/4"NPT M
90° Elbow ø1/4"NPT M x ø1/4"NPT SWF
Male quick coupler ø1/4"NPT
Identification ring YELLOW
Identification ring GREEN