ESP-SMT Smart Modular Control System
15
Cyclical
Water every 2 to 14 days
F
Press the UP and DOWN arrow
button(s) until Cyclical: Every
_ Day is blinking; then press the
SELECT button.
G
The CYCLICAL WATERING screen
will appear and the value for Water
Every X Days will be blinking.
a. Press the - or + button(s) to enter
a value of between 2 and 14 days
between irrigation cycles; then
press the NEXT button.
b. The date to Begin Watering dd
mmm will begin to blink. Press the
- or + button(s) to set the date in
which you want the rst irrigation
cycle to begin; then press the NEXT
button; the BLOCK ON SPECIFIC DAY
OF WEEK screen will appear.
!
NOTE: You can delay the actual
start date up to the number of
days you set between irrigation
cycles.
Block One Day A Week
Allows a specific day of the week to be
blocked on a regular basis.
H
The BLOCK WATERING ON SPECIFIC
DAY OF WEEK screen will appear.
Press the UP and Down arrow
button(s) until the desired selection
is blinking; then press the SELECT
button and the SET ALLOWED
WATERING TIME SCREEN will appear
(see next page for details).
!
NOTE: An ideal application of this
feature is to block irrigation on the
day the gardener normally comes.
The ESP-SMT controller will always
block irrigation on the specific day
of the week selected independent
of the Allowed Watering Day’s
selection that was entered in
the Configure Controller Section
during step 3 on page 13.
F
a.
G
b.
G
H
SELECT
ALLOWED WATER DAYS
No Restrictions
By Days of the Week
Even Days: 2,4,6,… 30
Odd Days: 1,3,5,…no31
Cyclical:Every _ Days
BACK
CYCLICAL WATERING
Water Every 3 Days
Begin Watering 01 Jan
NEXTBACK
CYCLICAL WATERING
Water Every 5 Days
Begin Watering 04 Jan
NEXTBACK
BLOCK WATERING ON
SPECIFIC DAY OF WEEK
None Monday
Tuesday Wednesday
Thursday Friday
Saturday Sunday
Sat & Sun
SELECT
BACK
To Next Page
Loading...
Need help?
General
