Raisecom iTN8600-I - Leds; DC Power Supply RPD1304-48 S12; Version; Appearance

Raisecom
iTN8600-I (A) Product Description
3 Cards and parts
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
18
3.1.5 LEDs
Table 3-4 lists LEDs on the iTN8600-I.
Table 3-4 LEDs on the iTN8600-I
Print
Color
Description
SYS
Green
System working LED

Green: the system works abnormally.

Off: the system works abnormally.

Blinking green: the system works normally.
ALM
Red
Alarm LED

Red: severe alarms are generated on the device.

Blinking: minor alarms are generated on the device.

Off: no alarm is generated on the device.
LNK/ACT
Green
SNMP/EXT interface working LED

Green: the interface is properly connected.

Off: the interface is not connected or improperly
connected.

Blinking green: the interface is sending/receiving data.
C1–C16,
C19, C22
Red
Client-side interface alarm LED

Red: LOS alarms are generated.

Off: no LOS alarm is generated.
LOS
Red
Line-side interface alarm LED

Red: LOS alarms are generated.

Off: no LOS alarm is generated.
3.2 DC power supply RPD1304-48S12
3.2.1 Version
Table 3-5 Version of the DC power supply
Model
Version
RPD1304-48S12
A.00 or later
3.2.2 Appearance
Figure 3-2 shows the panel of the DC power supply, including the captive screw, heat
dissipation holes, handle, power LED, and power interface.