Raisecom iTN8600-I - Cables; Fiber; Figure 5-1 LC;PC Fiber Connector

Raisecom
iTN8600-I (A) Product Description
5 Appendix
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
42
103.1 Gbit/s and 111.8 Gbit/s (MPO, compatible with 100GE and OTU4)
Table 5-13 Parameters of the UC2 module (103.1 Gbit/s and 111.8 Gbit/s, MPO, compatible with
100GE and OTU4)
Model
Tx
wavelen
gth (nm)
Rx
wavelength
(nm)
Tx optical
power per
channel
(dBm)
Overloa
d
(dBm)
Extinc
tion
ratio
(dB)
Rx
sensitivity
per
channel
(dBm)
Mo
de
Trans
missio
n
distan
ce
(km)
UC2-
100G/
DCO
1567.54
(191.25
THz) to
1528.77
(196.10
THz)
1567.54
(191.25
THz)–
1528.77
(196.10 THz)
>-5
> 0
-
< -30
SM
2400
5.2 Cables
5.2.1 Fiber
Choose the length of the fiber reasonably according to actual situations on site.
LC fiber
The optical module on the iTN8600-I supports the 2-mm single-mode or multi-mode fiber
that uses the LC connector.
Figure 5-1 shows the LC/PC fiber connector used by the iTN8600-I.
Figure 5-1 LC/PC fiber connector
When connecting or removing the LC/PC fiber connector, align the connector with the optical
interface, and do not rotate the fiber. Operate the fiber as below: