Raisecom iTN8600-I - Table 5-21 Technical Specifications of the Ground Cable; Table 5-22 Technical Specifications of the OT Terminal

Raisecom
iTN8600-I (A) Product Description
5 Appendix
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
53
1
Inner diameter of
soldering lug
2
Inner diameter of
sheath
3
Thickness of soldering
terminal
Technical specifications
Table 5-21 lists technical specifications of the ground cable.
Table 5-21 Technical specifications of the ground cable
Parameter
Description
Cable model
PIL-ground cable-Φ4/Φ4-D/RoHS
Cable standard
Comply with the UL standard and RoHS requirements.
Conducting wire
Yellow/Green multistrand copper 16AWG (1×1.25mm
2
) wire
Comply with UL1007 standard.
Cable length
240 mm or customized. The letter D in the cable name
indicates the length, which can be customized. For example,
if the customer requires a 2-m cable, you can name it PIL-
ground cable-Φ4/Φ4-2000mm/RoHS.
Table 5-22 lists technical specifications of the OT terminal.
Table 5-22 Technical specifications of the OT terminal
Parameter
Description
Model
Ground round-pressed terminal (M4)/RoHS
Technical specifications

Inner diameter of soldering lug: 4 mm

Outer diameter of soldering lug: ≤ 8 mm

Inner diameter of sheath: 2.1 mm

Thickness of soldering lug: ≥ 0.6 mm
Cross-sectional area of
the conducting wire
16–15 AWG (1.2–1.5 mm
2
)

The iTN8600-I is delivered without the ground cable but with the OT terminal
(ground round-pressed terminal (M4)/RoHS). You can prepare the ground cable
by yourself or make it on site according to technical specifications.

The ground cable cannot be longer than 30 m and should be as short as possible;
otherwise, a ground bar should be used instead.