Raisecom iTN8600-I - Functions; Default Configurations; Figure 3-4 Panel of the Fan; Table 3-18 Functions of the Fan

Raisecom
iTN8600-I (A) Product Description
3 Cards and parts
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
23
Figure 3-4 Panel of the fan
3.4.3 Functions
Table 3-18 Functions of the fan
Function
Description
Basic functions

Each FANS383 is embedded with 2 fans.

Support hot swapping.

Each device must use 3 FANS383.

Support manually configuring the rotational speed to 4 gears.
Alarm
monitoring

Support speed feedback.

Support in-position monitoring.

Support fan fault alarms, including the alarm of decrease of the
rotational speed due to fan stopping rotating and fan aging.
3.5 Default configurations
Table 3-19 lists default configurations of the iTN8600-I-XT4D.
Table 3-19 Default configurations of the iTN8600-I-XT4D
Type
Default configuration
In-band NMS
channel

GCC0 is enabled on L1 and L2.

GCC0 of L1 and L2 is added to the bridge interface to support
automatic topology discovery.
Client-side
mapping mode
OTN

By default, no cross connection and protection are configured on the device.

For interfaces and services supported in client-side mapping mode, see Table 1-2.