Raisecom iTN8600-I - Transport Environment; Table 4-6 Climatic Environmental Requirements in Transport

Raisecom
iTN8600-I (A) Product Description
4 Technical specifications
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
28
Chemical active substance
Concentration
HCl (mg/m³)
≤ 0.10
HF (mg/m³)
≤ 0.01
O
3
(mg/m³)
≤ 0.05
4.6.2 Transport environment
Climatic environment
Table 4-6 lists climatic environmental requirements in transport.
Table 4-6 Climatic environmental requirements in transport
Parameter
Description
Air pressure (kPa)
86–106
Temperature (°C) (altitude: 0–1800 m)
-25 to +60
Temperature change rate (°C/min)
≤ 1
Relative humidity
10%–90% RH
Solar radiation (W/m²)
≤ 1120
Heat radiation (W/m²)
≤ 600
Wind speed (m/s)
≤ 20
Waterproof requirements
In transport, you need to ensure the following matters:

The packing case is intact.

Take measurements to prevent water from entering the packing case.

There is no impounded water on the vehicle.
Biotic environment
Keep the iTN8600-I away from:

Microorganism, such as fungus and mould

Rodent animals, such as rats
Air cleanliness
There should not be any explosive, electro-conductive, magneto-conductive, or corrosive
substance.