Raisecom MSG1200 - Cables; Fiber; Table 2-5 Types and Purposes of Fibers

Raisecom
MSG1200 (A) User Manual
2 Product structure
Raisecom Technology Co., Ltd.
15
The MSG1200 supports mainstream 3G NICs. 3G standards supported by the MSG1200 are
shown as below:

CDMA2000

Wideband Code Division Multiple Access (WCDMA)

Time Division Synchronous Code Division Multiple Access (TD-SCDMA)
The 3G NIC is not delivered with the MSG1200. Order it as required.
2.5 Cables
Cables required for the MSG1200 include the following 3 types:

Fiber

Ethernet cable

Telephone cable
2.5.1 Fiber
Introduction
The MSG1200 can use the single-mode fiber and multi-mode fiber. These 2 fibers are
identical in appearance but different in color. The single-mode fiber is yellow while the multi-
mode fiber is orange.
The MSG1200 can use a fiber to connect the Optical Distribution Frame (ODF) or the optical
interface of other devices. Table 2-5 lists types and purposes of fibers.
Table 2-5 Types and purposes of fibers
Purpose
Local connector
Remote connector
Type
Standard

Connect the
Ethernet optical
interface to the
ODF.

Connect the
Ethernet optical
interface to the
optical interface of
other devices.
LC/PC
LC/PC
2 mm single-mode fiber
ITU-T
G.652
2 mm multi-mode fiber
LC/PC
FC/PC
2 mm single-mode fiber
2 mm multi-mode fiber
LC/PC
SC/PC
2 mm single-mode fiber
2 mm multi-mode fiber
Connect the PON
interface to the
ODF.
SC/PC
LC/PC
2 mm single-mode fiber
SC/PC
FC/PC
2 mm single-mode fiber
SC/PC
SC/PC
2 mm single-mode fiber