Operating Manual 1302.6163.12 - 03 6.347
R&S ESU Remote Control – Description of Commands
Alphabetical List of Remote Commands
[SENSe<1|2>:]SCAN<1 to 10>:INPut:TYPE INPUT1 | INPUT2 6.212
[SENSe<1|2>:]SCAN<1 to 10>:RANGes[:COUNt] 1 to 10 6.212
[SENSe<1|2>:]SCAN<1 to 10>:STARt fmin to fmax 6.210
[SENSe<1|2>:]SCAN<1 to 10>:STEP fmin to fmax 6.210
[SENSe<1|2>:]SCAN<1 to 10>:STOP fmin to fmax 6.210
[SENSe<1|2>:]SCAN<1 to 10>:TIME 10 µs to 100 s 6.211
[SENSe<1|2>:]SWEep:COUNt 0 to 32767 6.213
[SENSe<1|2>:]SWEep:COUNt:CURRent? 6.214
[SENSe<1|2>:]SWEep:EGATe ON | OFF 6.214
[SENSe<1|2>:]SWEep:EGATe:HOLDoff 125 ns to 100 s 6.215
[SENSe<1|2>:]SWEep:EGATe:LENGth 0 to 100 s 6.216
[SENSe<1|2>:]SWEep:EGATe:POLarity POSitive | NEGative 6.215
[SENSe<1|2>:]SWEep:EGATe:SOURce EXTernal | IFPower 6.216
[SENSe<1|2>:]SWEep:EGATe:TRACe<1..3>COMMent 6.216
[SENSe<1|2>:]SWEep:EGATe:TRACe<1..3>PERiod <value> 6.217
[SENSe<1|2>:]SWEep:EGATe:TRACe<1..3>STARt<1..3> | STOP<1..3> <value> 6.217
[SENSe<1|2>:]SWEep:EGATe:TRACe<1..3>STATe<1..3> ON | OFF 6.216
[SENSe<1|2>:]SWEep:EGATe:TYPE LEVel | EDGE 6.215
[SENSe<1|2>:]SWEep:IF:SHIFt OFF | A | B | AUTO 6.217
[SENSe<1|2>:]SWEep:IF:SHIFt:FREQuency <numeric value> 6.218
[SENSe<1|2>:]SWEep:MODE AUTO | LIST | ESPectrum 6.218
[SENSe<1|2>:]SWEep:POINts 155, 313, 625, 1251, 1999, 2501, 5001,
10001, 20001, 30001
6.218
[SENSe<1|2>:]SWEep:SPACing LINear | LOGarithmic | AUTO 6.219
[SENSe<1|2>:]SWEep:TIME 10 µs to 100 s (receiver) | 2.5 ms to
16000 s (frequency domain) | 1 µs to
16000 s (time domain)
6.213
[SENSe<1|2>:]SWEep:TIME:AUTO ON | OFF 6.213
SOURce<1|2>:AM:STATe ON | OFF 6.220
SOURce<1|2>:DM:STATe ON | OFF 6.220
SOURce<1|2>:EXTernal<1|2>:FREQuency[:FACTor]:DENominator <numeric_value> 6.223
SOURce<1|2>:EXTernal<1|2>:FREQuency[:FACTor]:NUMerator <numeric_value> 6.224
SOURce<1|2>:EXTernal<1|2>:FREQuency:OFFSet <numeric_value> 6.224
SOURce<1|2>:EXTernal<1|2>:FREQuency:SWEep[:STATe] ON | OFF 6.225
SOURce<1|2>:EXTernal<1|2>:POWer[:LEVel] <numeric_value> 6.225
SOURce<1|2>:EXTernal<1|2>:ROSCillator[:SOURce] INTernal | EXTernal 6.225
SOURce<1|2>:EXTernal<1|2>[:STATe] ON | OFF 6.223
SOURce<1|2>:FM:DEViation 100Hz to 10MHz 6.221
SOURce<1|2>:FM:STATe ON | OFF 6.220
SOURce<1|2>:FREQuency:OFFSet -150MHz to 150MHz 6.221
SOURce<1|2>:POWer[:LEVel][:IMMediate][:AMPLitude] <numeric_value> 6.221
SOURce<1|2>:POWer[:LEVel][:IMMediate]:OFFSet -200dB to +200dB 6.222
SOURce<1|2>:POWer:MODE FIXed | SWEep 6.222
SOURce<1|2>:POWer:STARt -30 dBm to +5 dBm 6.222
SOURce<1|2>:POWer:STOP -30 dBm to +5 dBm 6.222
STATus:OPERation:CONDition? 6.226
STATus:OPERation:ENABle 0 to 65535 6.226
STATus:OPERation[:EVENt]? 6.226
STATus:OPERation:NTRansition 0 to 65535 6.227
STATus:OPERation:PTRansition 0 to 65535 6.226
STATus:PRESet 6.227
STATus:QUEStionable:ACPLimit:CONDition? 6.231
STATus:QUEStionable:ACPLimit:ENABle 0 to 65535 6.231
STATus:QUEStionable:ACPLimit[:EVENt]? 6.231
STATus:QUEStionable:ACPLimit:NTRansition 0 to 65535 6.232
Command Parameter Page
To Next Page
Loading...
