R&S ESU Remote Control – Description of Commands
Alphabetical List of Remote Commands
6.346 Operating Manual 1302.6163.12 - 03
[SENSe<1|2>:]LIST:RANGe<1…20>[:FREQuency]:STOP <numeric_value> 6.190
[SENSe<1|2>:]LIST:RANGe<1…20>:INPut:ATTenuation <numeric_value> 6.190
[SENSe<1|2>:]LIST:RANGe<1…20>:INPut:ATTenuation:AUTO ON | OFF 6.190
[SENSe<1|2>:]LIST:RANGe<1…20>:INPut:GAIN:STATe ON | OFF 6.190
[SENSe<1|2>:]LIST:RANGe<1…20>:POINts <numeric_value> 6.191
[SENSe<1|2>:]LIST:RANGe<1…20>:RLEVel <numeric_value> 6.191
[SENSe<1|2>:]LIST:RANGe<1…20>:SWEep:TIME <numeric_value> 6.191
[SENSe<1|2>:]LIST:RANGe<1…20>:SWEep:TIME:AUTO ON | OFF 6.192
[SENSe<1|2>:]LIST:RANGe<1…20>:TRANsducer <string> 6.192
[SENSe<1|2>:]MPOWer:RESult[:LIST]? 6.196
[SENSe<1|2>:]MPOWer:RESult:MIN? 6.197
[SENSe<1|2>:]MPOWer[:SEQuence] <analyzer freq>,<rbw>,<meas
time>,<trigger source>,
<trigger level>,<trigger offset>,<type of
meas>,<# of meas>
6.194
[SENSe<1|2>:]POWer:ACHannel:ACPairs 0 to 12 6.199
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth:ACHannel 100 Hz to 1000 MHz 6.200
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth:ALTernate<1...11> 100 Hz to 1000 MHz 6.200
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth[:CHANnel] 100 Hz to 1000 MHz 6.199
[SENSe<1|2>:]POWer:ACHannel:FILTer:ALPHa:ACHannel 0…1 6.201
[SENSe<1|2>:]POWer:ACHannel:FILTer:ALPHa:ALL 0…1 6.200
[SENSe<1|2>:]POWer:ACHannel:FILTer:ALPHa:ALTernate<1...11> 0…1 6.201
[SENSe<1|2>:]POWer:ACHannel:FILTer:ALPHa:CHANnel<1...12> 0…1 6.201
[SENSe<1|2>:]POWer:ACHannel:FILTer:STATe:ACHannel ON | OFF 6.202
[SENSe<1|2>:]POWer:ACHannel:FILTer:STATe:ALL ON | OFF 6.201
[SENSe<1|2>:]POWer:ACHannel:FILTer:STATe:ALTernate<1 to 11> ON | OFF 6.202
[SENSe<1|2>:]POWer:ACHannel:FILTer:STATe:CHANnel<1...12> ON | OFF 6.202
[SENSe<1|2>:]POWer:ACHannel:MODE ABSolute | RELative 6.202
[SENSe<1|2>:]POWer:ACHannel:PRESet ACPower | CPOWer | MCACpower |
OBANdwidth | OBWidth | CN | CN0
6.204
[SENSe<1|2>:]POWer:ACHannel:PRESet:RLEVel 6.204
[SENSe<1|2>:]POWer:ACHannel:PRESet:RLEVel:OFFSet 0 … 100 dB 6.203
[SENSe<1|2>:]POWer:ACHannel:REFerence:AUTO ONCE 6.203
[SENSe<1|2>:]POWer:ACHannel:REFerence:TXCHannel:AUTO MINimum | MAXimum | LHIGhest | OFF 6.203
[SENSe<1|2>:]POWer:ACHannel:REFerence:TXCHannel:MANual 1 to 12 6.204
[SENSe<1|2>:]POWer:ACHannel:SPACing:ACHannel 100 Hz to 2000 MHz 6.198
[SENSe<1|2>:]POWer:ACHannel:SPACing:ALTernate<1 to 11> 100 Hz to 2000 MHz 6.198
[SENSe<1|2>:]POWer:ACHannel:SPACing:CHANnel<1 to 11> 100 Hz to 2000 MHz 6.198
[SENSe<1|2>:]POWer:ACHannel:TXCHannel:COUNt 1 to 12 6.199
[SENSe<1|2>:]POWer:BANDwidth|BWIDth 10 to 99.9PCT 6.205
[SENSe<1|2>:]POWer:HSPeed ON | OFF 6.205
[SENSe<1|2>:]POWer:NCORrection ON | OFF 6.206
[SENSe<1|2>:]POWer:TRACe 1 to 3 6.206
[SENSe<1|2>:]ROSCillator:EXTernal:FREQuency 1MHz to 20MHz 6.208
[SENSe<1|2>:]ROSCillator:EXTernal:PLL NORMal | WIDE 6.208
[SENSe<1|2>:]ROSCillator[:INTernal]:TUNe 0 to 4095 6.208
[SENSe<1|2>:]ROSCillator[:INTernal]:TUNE:SAVE 6.209
[SENSe<1|2>:]ROSCillator:SOURce INTernal | EXTernal | EAUTo 6.207
[SENSe<1|2>:]ROSCillator:SOURce:EAUTo? 6.207
[SENSe<1|2>:]SCAN<1 to 10>:BANDwidth:RESolution 10 Hz to 10 MHz 6.210
[SENSe<1|2>:]SCAN<1 to 10>:INPut:ATTenuation dBmin to dBmax 6.211
[SENSe<1|2>:]SCAN<1 to 10>:INPut:ATTenuation:AUTO ON | OFF 6.211
[SENSe<1|2>:]SCAN<1 to 10>:INPut:GAIN:AUTO ON | OFF 6.212
[SENSe<1|2>:]SCAN<1 to 10>:INPut:GAIN:LNA[:STATe] ON | OFF 6.212
[SENSe<1|2>:]SCAN<1 to 10>:INPut:GAIN[:STATE] ON | OFF 6.211
Command Parameter Page
To Next Page
Loading...
