R&S ESU Series - Page 788

Operating Manual 1302.6163.12 - 03 6.349
R&S ESU Remote Control – Description of Commands
Alphabetical List of Remote Commands
SYSTem:FIRMware:UPDate <path> 6.241
SYSTem:HPCoupling FSP | HP 6.242
SYSTem:IDENtify:FACTory 6.242
SYSTem:IFGain:MODE NORMal | PULSe 6.242
SYSTem:KLOCk ON | OFF 6.243
SYSTem:LANGuage <language> 6.243
SYSTem:MSIZe? MBOard 6.245
SYSTem:PASSword[:CENable] 'password' 6.244
SYSTem:PRESet 6.244
SYSTem:PRESet:COMPatible FSP | OFF 6.244
SYSTem:RSWeep ON | OFF 6.245
SYSTem:SHUTdown 6.244
SYSTem:SPEaker:VOLume 0 to 1 6.244
SYSTem:TIME 0 to 23, 0 to 59, 0 to 59 6.245
SYSTem:VERSion? 6.245
TRACe[:DATA] TRACE1 | TRACE2 | TRACE3 | SINGle |
PHOLd | SCAN | STATus | FINAL1 |
FINAL2 | FINAL3 | LIST | SPURious,
<block> | <numeric_value>
6.246
TRACe<1|2>:COPY TRACE1| TRACE2| TRACE3 , TRACE1|
TRACE2| TRACE3
6.249
TRACe<1|2>:FEED:CONTrol<1..3> ALWays | NEVer 6.250
TRACe<1|2>:IMMediate:LEVel? 6.250
TRACe<1|2>:IMMediate:RESult? 6.250
TRACe<1|2>:IQ:DATA:FORMat COMPatible | IQBLock | IQPair 6.254
TRACe<1|2>:IQ:DATA:MEMory[:RF]? <offset samples>,<# of samples> 6.255
TRACe<1|2>:IQ:DATA? 6.252
TRACe<1|2>:IQ:FILTer:FLATness NORMal | WIDE 6.258
TRACe<1|2>:IQ:SET <filter type>,<rbw>,<sample rate>,<trigger
source>,<trigger slope>,
<pretrigger samples>,<# of samples>
6.256
TRACe<1|2>:IQ:SRATe 10.0 kHz to 81.6 MHz 6.257
TRACe<1|2>:IQ[:STATe] ON | OFF 6.258
TRACe<1|2>:POINTs LIMit, 1 to 10000 6.259
TRIGger<1|2>[:SEQuence]:HOLDoff -100 to 100s 6.261
TRIGger<1|2>[:SEQuence]:HOLDoff:ADJust:AUTO ON|OFF 6.261
TRIGger<1|2>[:SEQuence]:LEVel[:EXTernal] 0.5 to +3.5 V 6.260
TRIGger<1|2>[:SEQuence]:LEVel:IFPower -70 to +30 dBm 6.260
TRIGger<1|2>[:SEQuence]:LEVel:VIDeo 0 to 100PCT 6.261
TRIGger<1|2>[:SEQuence]:SLOPe POSitive | NEGative 6.261
TRIGger<1|2>[:SEQuence]:SOURce IMMediate | EXTernal | VIDeo | IFPower 6.260
UNIT<1|2>:POWer DBM | V | A | W | DB | PCT | UNITLESS |
DBPW | WATT | DBUV | DBMV | VOLT |
DBUA | AMPere | DBPT | DBUV_MHZ |
DBMV_MHZ | DBUA_MHZ | DBUV_M |
DBUA_M | DBUV_MMHZ | DBUA_MMHZ
6.262
Command Parameter Page