Rational SelfCookingCenter SCC WE - Page 35

1
2 3
Door hnge with connecting bolt
Gasket between unit and UV
Liing UV Drain line of condensate to unit drain
UltraVent UltraVent Plus
Connecting bolt
- 35 - V07 en, Basic_Installation_Accessories
When the unit turns on and sees the UV on the Bus, the unit automatically recognizes it and
turns it on. Once seen if the unit can not communicate with the UV or UVP the unit will
display a Service 35 error which can be bypassed. Check UV power, communications
cables for connections. UV (UVP) does not have a seperate Service 34.xx error code.
UV delay on time after a cooking process has ended can be individually set in Customer
settings on SCC.
UltraVent - Installation done correctly
US/Canada 12/2018